For 1990-2009 cars only
Removal Procedure
- Disconnect the negative battery cable.
- Disconnect the stop lamp switch from the plug connector.
- Turn the switch. Remove the switch from the brake pedal bracket.
Caution: Refer to Battery Disconnect Caution in the Preface section.
Installation Procedure
- Place the stop lamp switch into the plug connector.
- Twist the stop lamp switch into the brake pedal bracket hole.
- Depress the brake pedal and pull the switch plunger to its maximum setting to adjust the switch.
- Release the plunger and pull up on the pedal.
- Connect the negative battery cable.
