Removal Procedure
- Siphon the power steering fluid from the fluid reservoir.
- Loosen the hose clamps and remove both hoses from the fluid reservoir.
- Remove the fluid reservoir nuts.
Installation Procedure
- Attach the fluid reservoir to the fluid reservoir bracket.
Notice: Refer to Fastener Notice in the Preface section.
- Install the fluid reservoir with the nuts.
Tighten
Tighten the fluid reservoir nuts to 10 N·m
(89 lb in).
- Connect both hoses to the fluid reservoir and secure the hose clamps.
Notice: Refer to Power Steering Required Fluid Notice in the Preface section.
- Fill the fluid reservoir with power steering fluid.
- Inspect for leaks. If there are leaks, correct the cause of the leaks
and bleed the system. Refer to
Power Steering System Bleeding
.