Inspect other instrumentation lights.

Are other lights OFF?

--

Instrument Panel Illumination Lamps Inoperative in Instrument Panel, Gages and Console

Go to Step 2

1. Remove the controller.
2. Measure the voltage between terminals A3 and A4 of the controller connector.

Does the voltage measure within the specified range?

11-14 V

Go to Step 4

Go to Step 3

Repair the wiring harness between splice S204 and controller connector terminal A4 or between splice S203 and controller connector terminal A3

Did you complete the repair?

--

System OK

--

Inspect the illumination lamps.

Is 1 lamp burned out?

--

Go to Step 5

System OK

Replace the burned out illumination lamp.

Did you complete the replacement?

--

System OK

--