Removal Procedure
Caution: Refer to Battery Disconnect Caution in the Preface section.
- Disconnect the negative battery cable.
- Remove the bolts and the front fog lamp.
- Disconnect the electrical connector.
- Remove the fog lamp access cover.
- Remove the retaining wire.
- Remove the bulb.
Installation Procedure
- Install the bulb.
- Install the retaining wire.
- Install the fog lamp access cover.
- Connect the electrical connector.
Notice: Refer to Fastener Notice in the Preface section.
- Install the front fog lamp with the bolts.
Tighten
Tighten the front fog lamp bolts to 4 N·m (35 lb in).
- Connect the negative battery cable.