GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2005 🢒 Optra 🢒 General Information 🢒 General Information 🢒 Stabilizer Shaft Link Replacement

Removal Procedure

    Object Number: 1290612 Size: SH
  1. Remove the stabilizer shaft-to-stabilizer link nut.
  2. Remove the stabilizer link-to-strut assembly nut.
  3. Remove the stabilizer link.

Installation Procedure

    Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 1290626 Size: SH
  1. Install the stabilizer link.
  2. Install the stabilizer link-to-strut assembly nut.

    3. Tighten
    Tighten the stabilizer shaft-to-stabilizer link nut to 47 N·m (35 lb ft).

  3. Install the stabilizer shaft-to-stabilizer link nut.

    4. Tighten
    Tighten the stabilizer shaft-to-stabilizer link nut to 47 N·m (35 lb ft).