Crunch (dry Rubber Sound) Noise In The Front Suspension Over Bumps - keywords arm bind bump clunk control end front no noise suspension
| Subject: | Crunch (Dry rubber sound) Noise In The Front Suspension Over Bumps |
| Models: | 2004-2006 Chevrolet Aveo |
| 2004-2006 Chevrolet Epica, Optra (Canada Only) |
| 2005-2006 Pontiac Wave (Canada Only) |
This PI was superseded to include the Pontiac Wave. Please discard PIC3529B.
The following diagnosis might be helpful if the vehicle exhibits the symptom(s) described in this PI.
Condition/Concern:
Crunch (Dry rubber sound) noise from the front suspension over bumps when driving. This noise may be caused from a binding condition in the front lower control arm bushings.
Recommendation/Instructions:
Loosen both the front (horizontal) and rear (vertical) front control arm attachment bolts. Make sure you have the front control arms supporting the vehicle weight and then retighten the control arm bolts to factory spec's 110 N·m (81 lb ft).
Note: Do the same thing on the opposite side you are working on.
Please follow this diagnostic or repair process thoroughly and complete each step. If the condition exhibited is resolved without completing every step, the remaining steps do not need to be performed.
