Tools Required

J 21104-B Weatherstrip Remover Universal

1. Lower the front window.
2. Pry off the inside door handle trim bezel.
3. Remove the rear deck lid remote switch and the power window/mirror control switch.



4. Disconnect the electrical connectors.
5. Remove the door trim panel screws.
6. Pry off the trim panel using the J 21104-B .

1. Install the trim panel.
2. Connect the electrical connectors.
3. Install the rear deck lid remote switch and the power window/mirror control switch.

Notice: Refer to Fastener Notice in the Preface section.




4. Install the door trim panel screws.

Tighten
Tighten the door trim panel screws to 2.5 N·m (22 lb in).

5. Install the inside door handle trim bezel.
6. Raise the front window.