Removal Procedure
Caution: Refer to Battery Disconnect Caution in the Preface section.
- Disconnect the negative battery cable.
- Open the liftgate.
- Remove the liftgate lower garnish molding.
- Disconnect the electrical connector.
- Remove the screws and the liftgate lock.
- Disconnect the lock rod and electrical connector.
Installation Procedure
- Connect the lock rod and electrical connector.
Notice: Refer to Fastener Notice in the Preface section.
- Install the rear liftgate lock with the screws.
Tighten
Tighten the rear compartment lock screws to 6 N·m (53 lb in).
- Install the liftgate lower garnish molding.
- Close the liftgate.
- Connect the negative battery cable.