For 1990-2009 cars only
Removal Procedure
- Removal the front wheel well splash shield. Refer to Wheelhouse Splash Shield Replacement .
- Reposition the front headlamp.
- Remove the bolts securing the front fascia to the fender.
- Reposition the front fascia.
- Remove the fender bolts behind the front fascia.
- Remove the bolts at the base of the fender.
- Open the front door and remove the bolt at the base of the windshield pillar.
- Reposition the air inlet grille weatherstrip.
- Remove the upper fender bolts and the fender.
Installation Procedure
- Install the fender with the upper fender bolts.
- Reposition the air inlet weatherstrip to its original position.
- Install the bolt at the base of the windshield pillar.
- Install the bolts at the base of the fender.
- Install the front fender bolts behind the front fascia.
- Install the front fascia to its original position.
- Install the bolts securing the front fascia to the fender.
- Install the front headlamp to its original position.
- Install the front wheel well splash shield. Refer to Wheelhouse Splash Shield Replacement .
Notice: Refer to Fastener Notice in the Preface section.
Tighten
Tighten the upper fender bolts to 10 N·m (89 lb in).
Tighten
Tighten the windshield pillar fender bolt to 10 N·m (89 lb in).
Tighten
Tighten the lower fender bolts to 10 N·m (89 lb in).
Tighten
Tighten the front fender bolts to 10 N·m (89 lb in).
Tighten
Tighten the front fascia-to-fender bolts to 2.5 N·m (22 lb in).
