To replace a headlamp bulb:

1. Open the hood. See Hood Release for more information.
2. For wagon models, remove the two bolts from the top of the headlamp assembly and one nut on the inside that retains the headlamp assembly.

For hatchback models, remove the four screws and the radiator grill. Then remove the three bolts and the headlamp assembly.

3. Disconnect the wiring harness connector from the rear of the bulb.

Wagon Models





Hatchback Models




4. Remove the headlamp cap (A for the low-beam or B for the high-beam headlamp) by turning it counterclockwise.
5. Release the spring that retains the bulb.
6. Remove the old bulb.
7. Install a new bulb.
8. Reverse Steps 1 through 5 to install the headlamp assembly.