Automatic Transmission Controls Schematics. Chevrolet Optra 2008

For 1990-2009 cars only

Makes 🢒 Chevrolet 🢒 2008 🢒 Optra 🢒 Diagnostic Navigation 🢒 Vehicle Diagnostic Information 🢒 Automatic Transmission Controls Schematics

Figure 1:	TCM Power, Ground, MIL, Serial Data, Shift Program Switch Master Electrical Component List Control Module References Transmission Solenoid and Stop Lamp Switch Fuse Block - I/P ECM Fuse Fuse Block - I/P ECM Fuse Fuse Block - Underhood BATT MAIN, IGN 1, IGN 2 Fuses, Ignition Switch, Fuse Block-I/P RADIO, IMMOBILIZER, DLC, A/C CLK, HAZARD, RKE, TCM, REAR FOG Fuses Park/Neutral Position (PNP) Switch Data Communication G201 - 1 of 2 G203 G201 - 1 of 2
Figure 2:	Transmission Solenoids and Stop Lamp Switch Master Electrical Component List Control Module References Input Shaft, Output Shaft, and Vehicle Speed Sensors (VSS) TCM Power, Ground, MIL, Serial Data, and Shift Program Switch Fuse Block - Underhood B+ Bus, 1 of 3 Fuse Block - Underhood B+ Bus, 1 of 3
Figure 3:	Input Shaft, Output Shaft, and Vehicle Speed Sensors (VSS) Master Electrical Component List Control Module References Park/Neutral Position (PNP) Switch Transmission Solenoid and Stop Lamp Switch
Figure 4:	Park/Neutral Position (PNP) Switch Master Electrical Component List Control Module References Input Shaft, Output Shaft, and Vehicle Speed Sensors (VSS) Starting TCM Power, Ground, MIL, Serial Data, and Shift Program Switch G201 - 1 of 2 G201 - 1 of 2