Daytime Running Lamps (DRL) Inoperative Scandinavian
Diagnostic Aids
The daytime running lamp (DRL) system will not work if the parking brake is applied. The system is designed to work only when the engine is running and the parking brake is released. If the parking brake circuit is shorted to ground or the switch stays closed when the engine is running, the DRL system will not work.
Step | Action | Values | Yes | No |
|---|---|---|---|---|
Schematic Reference: Headlights/Daytime Running Lights (DRL) Schematics Connector End View Reference: Component Connector End Views | ||||
1 | Turn the headlamps ON. Do the headlamps, parking lamps, tail lamps, and instrument lamps work? | -- | Go to Step 3 | Go to Step 2 |
2 | Repair the regular headlamp system before completing this diagnostic table. Does the daytime running lamps (DRL) system work after the headlamps, exterior lamps, and instrument lamp systems have been repaired? | -- | System OK | Go to Step 3 |
3 | Inspect fuses F4. Is fuse F4 open? | -- | Go to Step 4 | Go to Step 5 |
4 |
Is the repair complete? | -- | System OK | -- |
5 |
Does the voltage measure within the specified range? | 11-14 V | Go to Step 7 | Go to Step 6 |
6 | Repair the power supply circuit for fuses F4. Did you complete the repair? | -- | System OK | -- |
7 |
Does the voltage measure within the specified range? | 11-14 V | Go to Step 9 | Go to Step 8 |
8 | Repair the open circuit between fuse F4 and terminal 6 of the DRL module connector. Did you complete the repair? | -- | System OK | -- |
9 | With the DRL module still disconnected, use an ohmmeter to measure the resistance between G203 and terminal 5 of the DRL module connector. Is the resistance equal to the specified value? | 0 Ω | Go to Step 11 | Go to Step 10 |
10 | Repair the circuit between G203 and terminal 5 of the DRL module connector. Did you complete the repair? | -- | System OK | -- |
11 |
Is the parking brake indicator lamp ON? | -- | Go to Step 12 | Go to Step 15 |
12 | Disconnect the electrical connector to the parking brake lever switch. Is the parking brake indicator lamp still ON? | -- | Go to Step 13 | Go to Step 14 |
13 | Repair the wire short to ground in the parking brake circuit. Did you complete the repair? | -- | System OK | -- |
14 | Replace the parking brake lever switch. Did you complete the replacement? | -- | System OK | -- |
15 | Replace the DRL module. Refer to Daytime Running Lights (DRL) Control Module Replacement . Did you complete the replacement? | -- | System OK | -- |
Daytime Running Lamps (DRL) Inoperative North American
Diagnostic Aids
The daytime running lamp (DRL) system will not work if the parking brake is applied. The system is designed to work only when the engine is running and the parking brake is released. If the parking brake circuit is shorted to ground or the switch stays closed when the engine is running, the DRL system will not work.
Step | Action | Values | Yes | No |
|---|---|---|---|---|
Schematic Reference: Headlights/Daytime Running Lights (DRL) Schematics Connector End View Reference: Component Connector End Views | ||||
1 | Turn the headlamps ON. Do the headlamps, parking lamps, tail lamps, and instrument lamps work? | -- | Go to Step 3 | Go to Step 2 |
2 | Repair the regular headlamp system before completing this diagnostic table. Does the daytime running lamps (DRL) system work after the headlamps, exterior lamps, and instrument lamp systems have been repaired? | -- | System OK | Go to Step 3 |
3 | Inspect fuses F6. Is fuse F6 open? | -- | Go to Step 4 | Go to Step 5 |
4 |
Is the repair complete? | -- | System OK | -- |
5 |
Does the voltage measure within the specified range? | 11-14 V | Go to Step 7 | Go to Step 6 |
6 | Repair the power supply circuit for fuses F6. Did you complete the repair? | -- | System OK | -- |
7 |
Does the voltage measure within the specified range? | 11-14 V | Go to Step 9 | Go to Step 8 |
8 | Repair the open circuit between fuse F6 and terminal 3 of the DRL module connector. Did you complete the repair? | -- | System OK | -- |
9 | With the DRL module still disconnected, use an ohmmeter to measure the resistance between G203 and terminal 4 of the DRL module connector. Is the resistance equal to the specified value? | 0 Ω | Go to Step 11 | Go to Step 10 |
10 | Repair the circuit between G203 and terminal 4 of the DRL module connector. Did you complete the repair? | -- | System OK | -- |
11 |
Is the parking brake indicator lamp ON? | -- | Go to Step 12 | Go to Step 15 |
12 | Disconnect the electrical connector to the parking brake lever switch. Is the parking brake indicator lamp still ON? | -- | Go to Step 13 | Go to Step 14 |
13 | Repair the wire short to ground in the parking brake circuit. Did you complete the repair? | -- | System OK | -- |
14 | Replace the parking brake lever switch. Did you complete the replacement? | -- | System OK | -- |
15 | Replace the DRL module. Refer to Daytime Running Lights (DRL) Control Module Replacement . Did you complete the replacement? | -- | System OK | -- |
