For 1990-2009 cars only
- Perform a preliminary inspection before any attempt is made to change or correct the wheel alignment factors. Refer to Preliminary Alignment Inspection .
- Loosen the front parallel link cam bolt to crossmember.
- Rotate the parallel link adjustment bolts until the preferred rear toe specification is obtained. Refer to Wheel Alignment Specifications .
- Hold the parallel link adjustment bolts and tighten the parallel link-to-crossmember nuts.
Notice: Refer to Fastener Notice in the Preface section.
Tighten
Tighten the bolt to 40 N·m (30 lb ft).
Tighten
Tighten the parallel link-to-crossmember nuts to 90 N·m (66 lb ft).
