GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2008 🢒 Optra 🢒 Body Systems 🢒 Wipers and Washers 🢒 Windshield Washer Hose Replacement

Removal Procedure

    Object Number: 1308541 Size: SH
  1. Remove the cowl vent grille. Refer to Air Inlet Grille Panel Replacement.
  2. Disconnect the windshield washer hose from the washer nozzles.

    3. Object Number: 1308539 Size: SH
  3. Remove the front left wheel. Refer to Tire and Wheel Removal and Installation.
  4. Remove the bolts and the screws and the front wheel well splash shield.
  5. Disconnect the washer hose from the washer reservoir.
  6. Remove the washer hose.

Installation Procedure

    Object Number: 1308539 Size: SH
  1. Install the washer hose.
  2. Connect the washer hose to the washer pump.

    3. Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 1308541 Size: SH
  3. Install the front wheel well splash shield with the bolts and the screws.

    4. Tighten
    Tighten the wheel well splash shield bolts to 1.5 N·m (13 lb in).

  4. Install the front left wheel. Refer to Tire and Wheel Removal and Installation.
  5. Connect the windshield washer hose to the washer nozzles.
  6. Install the cowl vent grille. Refer to Air Inlet Grille Panel Replacement.