Tools Required
• | DT 46463 (DW240-150) Transaxle Case Side Bearing Outer Race Adapter |
- Place the matchmarks (1) on the ring gear and differential case.
- Remove the 8 bolts.
- Using a plastic hammer, tap on the ring gear to remove it from the case.
- Using a suitable puller, remove the tapered roller bearing of transaxle housing side.
- Using a suitable puller, remove the tapered roller bearing of transaxle case side.
- Using a pin punch and hammer, drive out the pin from the ring gear side.
- Remove the differential pinion shaft from the case.
- Remove the 2 differential pinion gears, 2 differential side gears, 2 differential pinion thrust washers, and 2 differential side gear thrust washers.
- Using a driver, remove the oil seal from the transaxle housing.
- Using a suitable puller, remove the side bearing outer race of transaxle housing.
Notice: Use extreme care not to damage the transaxle case when removing the oil seal
using a screwdriver.
- Using a driver, remove the oil seal of transaxle case.
- Using the
DT 46463 (2) and the
DT 46465 (1), remove the transaxle case side bearing outer race and shim.