Ignition and Start Switch Replacement for Chevrolet Optra 2008

1. Remove the ignition switch lock cylinder. Refer to Ignition Lock Cylinder Replacement .
2. Remove the ignition switch retaining screw.
3. Disconnect the wiring and remove the ignition switch.

Notice: Refer to Fastener Notice in the Preface section.




1. Install the ignition switch with the ignition switch retaining screw.

Tighten
Tighten the ignition switch retaining screw to 2.5 N·m (22 lb in).

2. Connect the wiring to the ignition switch.
3. Install the ignition switch lock cylinder. Refer to Ignition Lock Cylinder Replacement .