Removal Procedure
Caution: Refer to Battery Disconnect Caution in the Preface section.
- Disconnect the negative battery cable.
- Remove the headliner. Refer to
Headlining Trim Panel Replacement
.
- Remove the drain hoses.
- Disconnect the electrical connectors.
- Remove the screws and the motor.
- Remove the motor control module.
- Remove the bolts and the housing from the vehicle.
Installation Procedure
Notice: Refer to Fastener Notice in the Preface section.
- Install the housing to the roof of the vehicle with the bolts.
Tighten
Tighten the sunroof housing bolts to 10 N·m (89 lb in).
- Install the motor control module.
- Install the motor with the screws.
Tighten
Tighten the sunroof motor screws to 3 N·m (27 lb in).
- Connect the electrical connectors.
- Install the drain hoses.
- Install the headliner. Refer to
Headlining Trim Panel Replacement
.
- Connect the negative battery cable.