GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2008 🢒 Optra 🢒 Preface 🢒 Cautions and Notices 🢒 Front Bumper Fascia Replacement

Removal Procedure

    Caution: Refer to Battery Disconnect Caution in the Preface section.


    Object Number: 1308608 Size: SH
  1. Disconnect the negative battery cable.
  2. Remove the front wheel well splash shields. Refer to Wheelhouse Splash Shield Replacement .
  3. Remove the fog lamps and the headlamps. Refer to Front Fog Lamp Replacement and Headlamp Replacement .
  4. Remove the fender-to-fascia bolts and the screws.

    5. Object Number: 1308609 Size: SH
  5. Remove the lower fascia screws and the bolts.

    6. Object Number: 1308612 Size: SH
  6. Remove the upper fascia screws.
  7. Remove the front bumper fascia.

Installation Procedure

    Object Number: 1308612 Size: SH
  1. Install the front bumper fascia.
  2. Install the upper fascia screws.

    3. Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 1308609 Size: SH
  3. Install the lower fascia screws and the bolts.

    4. Tighten
    Tighten the lower fascia screws to 2 N·m (18 lb in).


    Object Number: 1308608 Size: SH
  4. Install the fender-to-fascia bolts and the screws.

    5. Tighten

    • Tighten the fender-to-fascia bolts to 10 N·m (89 lb in).
    • Tighten the fender-to-fascia screws to 2 N·m (18 lb in).
  5. Install the headlamps and the fog lamps. Refer to Headlamp Replacement and Front Fog Lamp Replacement .
  6. Install the front wheel well splash shields. Refer to Wheelhouse Splash Shield Replacement .
  7. Connect the negative battery cable.