GM Service Manual Online
For 1990-2009 cars only
Makes
›
Chevrolet
›
2009
›
Optra
›
Suspension
›
Rear Suspension
› Trailing Arm Bracket Replacement
Search
Trailing Arm Bracket Replacement for Chevrolet Optra 2009
Removal Procedure
Raise and suitably support the vehicle. Refer to
Lifting and Jacking the Vehicle
.
Remove the trailing link-to-trailing link bracket nut and the bolt.
Remove the trailing link bracket-to-body bolts.
Remove the trailing link bracket.
Installation Procedure
Install the trailing link bracket.
Caution:
Refer to
Fastener Caution
in the Preface section.
Install the trailing link bracket-to-body bolts and tighten to
70 N·m (52 lb ft)
.
Connect the trailing link to the trailing link bracket by installing the bolt and the trailing link-to-trailing link bracket nut and tighten to
100 N·m (74 lb ft)
.
Lower the vehicle.