GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2009 🢒 Optra 🢒 Suspension 🢒 Rear Suspension 🢒 Stabilizer Shaft Link Replacement

Removal Procedure

    Object Number: 1290746 Size: SH
  1. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle.
  2. Remove the wheel. Refer to Tire and Wheel Removal and Installation.
  3. Remove the stabilizer shaft-to-stabilizer link nut.
  4. Remove the stabilizer link-to-strut assembly nut.
  5. Remove the stabilizer link.

Installation Procedure

    Object Number: 1290775 Size: SH
  1. Install the stabilizer link.

    2. Caution: Refer to Fastener Caution in the Preface section.

  2. Install the stabilizer link-to-strut assembly nut and tighten to 47 N·m (35 lb ft).
  3. Install the stabilizer shaft-to-stabilizer link nut and tighten to 47 N·m (35 lb ft).
  4. Install the wheel. Refer to Tire and Wheel Removal and Installation.
  5. Lower the vehicle.