GM Service Manual Online
For 1990-2009 cars only
Makes
›
Chevrolet
›
2009
›
Optra
›
Suspension
›
Rear Suspension
› Crossmember Replacement
Search
Crossmember Replacement for Chevrolet Optra 2009
Removal Procedure
Raise and suitably support the vehicle. Refer to
Lifting and Jacking the Vehicle
.
Remove the front parallel link bolt from the crossmember. Refer to
Lateral Link Replacement
.
Remove the rear parallel link bolt from the crossmember. Refer to
Lateral Link Replacement
.
Remove the rear wheel speed sensor wiring from the crossmember.
Remove the crossmember-to-body bolts.
Remove the crossmember.
Installation Procedure
Install the crossmember.
Caution:
Refer to
Fastener Caution
in the Preface section.
Install the crossmember-to-body bolts and tighten to
112 N·m (83 lb ft)
.
Route and install the rear wheel speed sensor wiring.
Install the rear parallel link bolt onto the crossmember. Refer to
Lateral Link Replacement
.
Install the front parallel link bolt onto the crossmember. Refer to
Lateral Link Replacement
.
Lower the vehicle.