For 1990-2009 cars only
Removal Procedure
- Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.
- Remove both front tires and wheels. Refer to Tire and Wheel Removal and Installation.
- If equipped with AWD, disconnect the stabilizer links from the stabilizer shaft.
- If equipped with AWD, swing the stabilizer shaft upwards in order to gain additional clearance.
- Remove the transmission mount-to-bracket through bolt.
- Remove the transmission mount-to-frame bolts.
- Remove the transmission mount from the vehicle.
Installation Procedure
- Position the transmission mount to the frame.
- Install the transmission mount-to-frame bolts and tighten to 50 N·m (37 lb ft).
- Install the transmission mount-to-bracket through bolt, while aligning the transmission mount to the bracket and tighten to 110 N·m (81 lb ft)..
- If equipped with AWD, lower the stabilizer shaft and connect the stabilizer links with the nuts and tighten to 65 N·m (48 lb ft)..
- Install both front tires and wheels. Refer to Tire and Wheel Removal and Installation.
- Lower the vehicle.
Caution: Refer to Fastener Caution in the Preface section.
