GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2009 🢒 Optra 🢒 Steering 🢒 Steering Wheel and Column 🢒 Turn Signal Multifunction Switch Replacement

Removal Procedure

    Warning: Refer to Battery Disconnect Warning in the Preface section.


    Object Number: 1308107 Size: SH
  1. Disconnect the negative battery cable.
  2. Remove the upper and the lower steering column cover panel screws.
  3. Remove the upper and the lower steering column cover panels.

    4. Object Number: 1308108 Size: SH
  4. Remove the turn signal switch by pushing the tabs on the top and the bottom of the switch housing.
  5. Disconnect the electrical connections from the turn signal switch.

Installation Procedure

    Object Number: 1308111 Size: SH
  1. Connect the electrical connections to the turn signal switch.
  2. Install the turn signal switch by snapping it into the switch housing.

    3. Caution: Refer to Fastener Caution in the Preface section.


    Object Number: 1308107 Size: SH
  3. Install the upper and the lower steering column cover panels. Install the upper and the lower steering column cover panel screws and tighten to 2.5 N·m (22 lb in).
  4. Connect the negative battery cable.