GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2009 🢒 Optra 🢒 Power and Signal Distribution 🢒 Wiring Systems and Power Management 🢒 Ignition Lock Cylinder Control Solenoid Replacement

Removal Procedure

    Warning: Refer to Battery Disconnect Warning in the Preface section.


    Object Number: 1308107 Size: SH
  1. Disconnect the negative battery cable.

  2. Remove the upper and the lower steering column cover and panel by removing the screws.

    3. Object Number: 1248391 Size: SH

    Note: Make sure not to drop the ignition cylinder solenoid spring.

  3. Remove the ignition cylinder solenoid screws and the ignition cylinder solenoid.
  4. Disconnect the electrical connector.

Installation Procedure

    Object Number: 1248391 Size: SH
  1. Connect the ignition cylinder solenoid electrical connector.

    2. Caution: Refer to Fastener Caution in the Preface section.

  2. Install the ignition cylinder solenoid with the screws and tighten to 2 N·m (18 lb in).

    3. Object Number: 1308107 Size: SH
  3. Install the upper and the lower steering column cover panel with the screws and tighten to 2.5 N·m (22 lb in).
  4. Connect the negative battery cable.