For 1990-2009 cars only
Removal Procedure
- Disconnect the negative battery cable.
- Remove the instrument panel under cover.
- Disconnect the electrical connector.
- Remove the tube by turning it clockwise.
- Remove the screws.
- Remove the in-car sensor with the tube.
Warning: Refer to Battery Disconnect Warning in the Preface section.
Installation Procedure
- Install the in-car sensor.
- Install the in-car sensor retaining screws and tighten.
- Install the air inlet tube and connect the electrical connector.
- Install the instrument panel under cover.
- Connect the battery negative cable.
