Inflatable Restraint Side Impact Sensor Replacement for Chevrolet Optra 2009
Removal Procedure
Warning: Refer to Sensing and Diagnostic Module Voltage after Ignition is Turned Off Warning in the Preface section.
Warning: Refer to Battery Disconnect Warning in the Preface section.
- Disconnect the negative battery cable.
- Remove the trim from the center pillar.
- Disconnect the side impact sensor connector (2).
- Remove the side impact sensor mounting bolts.
- Remove the side impact sensor (1).
Installation Procedure
- Install the side impact sensor (1).
Caution: Refer to Fastener Caution in the Preface section.
- Install the side impact sensor mounting bolts and tighten to
8 N·m (71 lb in).
- Connect the side impact sensor connector (2).
- Install the trim to the center pillar.
- Connect the negative battery cable.