GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2009 🢒 Optra 🢒 Preface 🢒 Dangers, Warnings, and Cautions 🢒 Front Seat Belt Replacement

Removal Procedure

    Object Number: 1308483 Size: SH
  1. Remove the plastic cap to reveal the lower center pillar seat belt anchor.
  2. Remove the bolt and the lower center pillar seat belt anchor.

    3. Object Number: 1308484 Size: SH
  3. Remove the lower center pillar trim panel. Refer to Center Pillar Lower Trim Panel Replacement.
  4. Remove the plastic cap to reveal the upper center pillar seat belt anchor.
  5. Remove the bolt and the upper center pillar seat belt anchor.

    6. Object Number: 1308485 Size: SH
  6. Remove the screws from the seat belt retractor bracket.
  7. Remove the bolt and the seat belt retractor.

Installation Procedure

    Caution: Refer to Fastener Caution in the Preface section.


    Object Number: 1308485 Size: SH
  1. Install the seat belt retractor with the bolt and tighten to 38 N·m (28 lb ft).

    2. Object Number: 1308484 Size: SH
  2. Install the seat belt retractor bracket with the screw and tighten to 3 N·m (27 lb in).
  3. Install the upper center pillar seat belt anchor with the bolt and tighten to 38 N·m (28 lb ft).
  4. Install the seat belt anchor plastic cap.

    5. Object Number: 1308483 Size: SH
  5. Install the lower center pillar trim panel. Refer to Center Pillar Lower Trim Panel Replacement.
  6. Install the lower center pillar seat belt anchor with the bolt and tighten to 38 N·m (28 lb ft).
  7. Install the seat belt anchor plastic cap.