Removal Procedure
Notice: Refer to Fuel Pressure Notice in the Preface section.
- Relieve the fuel system pressure. Refer to
Fuel Pressure Relief
.
Caution: Refer to Battery Disconnect Caution in the Preface section.
- Disconnect the negative battery cable.
- Disconnect the inlet/outlet fuel lines by moving the line connector lock forward and pulling the hose off of the fuel filter tube.
- Disconnect the fuel filter ground.
- Remove the fuel filter bracket bolts.
- Pull the fuel filter out of the retaining clamp.
Installation Procedure
- Install the new fuel filter into the retaining clamp. Note the flow direction.
Notice: Refer to Fastener Notice in the Preface section.
- Install the fuel filter bracket bolts.
Tighten
Tighten the fuel filter bracket bolts to 4 N·m (35 lb in).
- Connect the inlet/outlet lines. Secure the lines with the connector lock.
- Perform a leak test of the fuel filter.