Removal Procedure
Caution: Refer to Battery Disconnect Caution in the Preface section.
- Disconnect the negative battery cable.
- Disconnect the intake air temperature (IAT) sensor.
- Remove the air cleaner outlet hose from the throttle body.
- Remove the breather tube from the camshaft cover.
- Remove the air cleaner housing bolts.
- Remove the air cleaner housing.
Installation Procedure
- Install the air cleaner housing.
Notice: Refer to Fastener Notice in the Preface section.
- Install the air cleaner housing bolts.
Tighten
Tighten the air cleaner housing bolts to 10 N·m (89 lb in).
- Connect the air intake tube to the throttle body.
- Connect the breather tube to the valve cover.
- Connect the IAT sensor.
- Connect the negative battery cable.