GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

    Caution: Refer to Sensing and Diagnostic Module Voltage after Ignition is Turned Off Caution in the Preface section.

    Caution: Refer to Battery Disconnect Caution in the Preface section.


    Object Number: 1308843  Size: SH
  1. Disconnect the negative battery cable.
  2. Remove the glove box. Refer to Instrument Panel Storage Compartment Replacement .
  3. Disconnect the passenger air bag yellow electrical connector.
  4. Remove the instrument panel (I/P) module by removing the mounting bolts from the air bag bracket.

Installation Procedure


    Object Number: 1308843  Size: SH
  1. Install the I/P module to the I/P.
  2. Notice: Refer to Fastener Notice in the Preface section.

  3. Install the I/P module mounting bolts.
  4. Tighten
    Tighten the I/P module mounting bolts to 11 N·m (97 lb in).

  5. Connect the passenger air bag yellow electrical connector.
  6. Install the glove box. Refer to Instrument Panel Storage Compartment Replacement .
  7. Connect the negative battery cable.