Removal Procedure
Caution: Refer to Battery Disconnect Caution in the Preface section.
- Disconnect the negative battery cable.
- Remove the upper and the lower steering column cover panel screws.
- Remove the upper and the lower steering column cover panels.
- Remove the wiper switch by pushing the tabs on the top and the bottom of the switch housing.
- Disconnect the electrical connector from the wiper switch. Disconnect the cruise control connector, if so equipped.
Installation Procedure
- Connect the electrical connector from the wiper switch. Connect the cruise control connector, if so equipped.
- Install the wiper switch by snapping it into the switch housing.
Notice: Refer to Fastener Notice in the Preface section.
- Install the upper and the lower steering column cover panels. Install the upper and the lower steering column cover panel screws.
Tighten
Tighten the upper and the lower steering column cover panel screws to 2.5 N·m (22 lb in).
- Connect the negative battery cable.