GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2006 🢒 Optra - Mexico 🢒 General Information 🢒 General Information 🢒 Brake Pad Inspection
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Remove the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation .
  3. Inspect the brake pads for wear.
  4. Measure the thickness.

    5. Specification

        • The minimum thickness of the inner or the outer front pad is 2 mm (0.08 in).
        • The minimum thickness of the inner or the outer rear pad is 2 mm (0.08 in).
  5. Install the brake pads in axle sets only.
  6. Install the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation .
  7. Lower the vehicle.