GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2008 🢒 Optra - Mexico 🢒 Engine 🢒 Engine Controls - 2.0L (L34 GMDAT) 🢒 Fuel Tank Pressure Sensor Replacement

Removal Procedure
  1. Remove the fuel fill cap.

    2. Caution: Refer to Battery Disconnect Caution in the Preface section.

  2. Disconnect the negative battery cable.
  3. Remove the rear seat. Refer to Rear Seat Cushion Replacement .

    4. Object Number: 1376163 Size: SH
  4. Remove the fuel sender assembly access cover.

    5. Object Number: 1376164 Size: SH
  5. Disconnect the fuel tank pressure (FTP) sensor electrical connector.
  6. Remove the FTP from the fuel sender assembly.

Installation Procedure

    Object Number: 1376165 Size: SH
  1. Install the FTP sensor to the fuel sender assembly.

    2. Object Number: 1376164 Size: SH
  2. Connect the FTP sensor electrical connector.

    3. Object Number: 1376163 Size: SH
  3. Install the fuel pump access cover.
  4. Install the rear seat. Refer to Rear Seat Cushion Replacement .
  5. Connect the negative battery cable.
  6. Install the fuel fill cap.