Removal Procedure
Caution: Refer to Battery Disconnect Caution in the Preface section.
- Disconnect the negative battery cable.
- Remove the front left wheel. Refer to
Tire and Wheel Removal and Installation
.
- Remove the bolts and the screws and the front wheel well splash shield.
- Disconnect the washer hose from the washer pump.
- Disconnect the reservoir pump electrical connectors.
- Remove the bolts and the reservoir.
Installation Procedure
Notice: Refer to Fastener Notice in the Preface section.
- Install the reservoir with the bolts.
Tighten
Tighten the washer fluid reservoir bolts to 8 N·m (71 lb in).
- Connect the reservoir pump electrical connector.
- Connect the washer hose to the washer pump.
- Install the front wheel well splash shield with the bolts and screws.
Tighten
Tighten the front wheel well splash shield bolts to 1.5 N·m (13 lb in).
- Install the front left wheel. Refer to
Tire and Wheel Removal and Installation
.
- Connect the negative battery cable.