Radio Antenna Module Replacement Sedan

Caution: Refer to Battery Disconnect Caution in the Preface section.




1. Disconnect the negative battery cable.
2. Remove the rear quarter upper trim panel. Refer to Quarter Upper Trim Panel Replacement .
3. Disconnect the electrical connector.
4. Remove the screws and the glass antenna module.

Notice: Refer to Fastener Notice in the Preface section.




1. Install the glass antenna module with the screws.

Tighten
Tighten the glass antenna screws to 2 N·m (18 lb in).

2. Connect the electrical connectors.
3. Install the rear quarter upper trim panel. Refer to Quarter Upper Trim Panel Replacement .
4. Connect the negative battery cable.

Radio Antenna Module Replacement Hatchback/Wagon

Caution: Refer to Battery Disconnect Caution in the Preface section.




1. Disconnect the negative battery cable.
2. Remove the windshield garnish moulding. Refer to Windshield Pillar Garnish Molding Replacement in Interior Trim.
3. Remove the sun visors. Refer to Sunshade Replacement in Interior Trim.
4. Remove the headliner. Refer to Headlining Trim Panel Replacement in Interior Trim.
5. Disconnect the antenna module electrical connector.
6. Remove the screws (1) and the antenna module.

1. Install the antenna module with the screws (1).

Tighten
Tighten the antenna module screws to 2 N·m (18 lb in).

2. Connect the antenna module electrical connector.
3. Install the headliner. Refer to Headlining Trim Panel Replacement in Interior Trim.
4. Install the sun visors. Refer to Sunshade Replacement in Interior Trim.
5. Install the windshield garnish moulding. Refer to Windshield Pillar Garnish Molding Replacement in Interior Trim.
6. Connect the negative battery cable.