GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2008 🢒 Optra - Mexico 🢒 Transmission/Transaxle 🢒 Manual Transaxle - D16 🢒 Input Shaft Assemble

    Object Number: 1251695 Size: SH
  1. Press the cluster shaft bearing onto the input shaft gear cluster.

    2. Object Number: 1251697 Size: SH
  2. Press the input driveshaft into the input shaft gear cluster assembly.

    3. Object Number: 1251692 Size: SH
  3. Install the snap ring at the base of the gear cluster.

    4. Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 1251691 Size: SH
  4. Install the detent screw at the end of the input driveshaft.

    5. Tighten
    Tighten the input detent screw to 15 N·m (11 lb ft).