For 1990-2009 cars only
Removal Procedure
- Disconnect the negative battery cable.
- Remove the center molding. Refer to Instrument Panel Center Trim Panel Replacement in Instrument Panel, Gages and Console.
- Turn the bulb holder to the left and pull out the bulb.
Caution: Refer to Battery Disconnect Caution in the Preface section.
Installation Procedure
- Install the bulb into the holder and turn the bulb to the right.
- Install the control assembly. Refer to Instrument Panel Center Trim Panel Replacement in Instrument Panel, Gages and Console.
- Connect the negative battery cable.
- Verify that the knob lights for proper operation.
