Exhaust Gas Recirculation Valve Replacement European and North American Emissions
Removal Procedure
Warning: Refer to Battery Disconnect Warning in the Preface section.
- Disconnect the negative battery cable.
- Disconnect the electrical exhaust gas recirculation (EGR) valve electrical connector.
- Remove the EGR valve retaining bolts.
- Remove the EGR valve.
Installation Procedure
Caution: Refer to Fastener Caution in the Preface section.
- Install the EGR valve with the retaining bolts and tighten to
30 N·m (22 lb ft).
- Connect the EGR valve electrical connector.
- Connect the negative battery cable.
Exhaust Gas Recirculation Valve Replacement Non European Emissions
Removal Procedure
Warning: Refer to Battery Disconnect Warning in the Preface section.
- Disconnect the negative battery cable.
- Disconnect the vacuum hose from the exhaust gas recirculation (EGR) valve.
- Remove the EGR valve retaining bolts.
- Remove the EGR valve.
Installation Procedure
Caution: Refer to Fastener Caution in the Preface section.
- Install the EGR valve with the retaining bolts and tighten to
30 N·m (22 lb ft).
- Disconnect the vacuum hose to the EGR valve.
- Connect the EGR valve electrical connector.
- Connect the negative battery cable.