Removal Procedure
Warning: Refer to Battery Disconnect Warning in the Preface section.
- Disconnect the negative battery cable.
- Disconnect the glow plug control unit.
- Remove the glow plug control unit retaining nut.
- Remove the glow plug control unit.
Installation Procedure
Caution: Refer to Fastener Caution in the Preface section.
- Install the glow plug control unit.
- the glow plug control unit retaining nut.
Tighten
Tighten the glow plug control unit retaining nut to 12 N·m (106 lb in).
- Connect the glow plug control unit connector.
- Install the negative battery cable.