Removal Procedure
Warning: Refer to Battery Disconnect Warning in the Preface section.
- Disconnect the battery negative cable and then disconnect the battery positive cable.
- Loosen the nuts that fasten the battery hold-down bar bracket.
- Remove the battery hold-down bar bracket with the nuts attached.
- Remove the battery from the battery tray.
Installation Procedure
- Install the battery.
Caution: Refer to Fastener Caution in the Preface section.
- Install the battery hold-down bar bracket.
Tighten
Tighten the battery hold-down bar bracket retaining nuts to 4 N·m (35 lb in).
- Connect the positive battery cable.
- Connect the negative battery cable.