GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2009 🢒 Optra - Mexico 🢒 Engine 🢒 Engine Mechanical - 1.8L (LDA) 🢒 Valve Rocker Arm Cleaning and Inspection

    Object Number: 1289661 Size: SH
  1. Inspect the valve stem tip for wear.
  2. Inspect the valve key grooves and the oil seal grooves for chips and wear.
  3. Inspect the valves for burns or cracks.
  4. Inspect the valve stem for burrs and scratches.
  5. Inspect the valve stem. The valve stem must be straight.
  6. Inspect the valve face for grooving. If the groove is so deep that refacing the valve would result in a sharp edge, replace the valve.

    7. Object Number: 1289662 Size: SH
  7. Inspect the valve spring. If the valve spring ends are not parallel, replace the valve spring.
  8. Measure the valve spring height. Refer to Engine Mechanical Specifications. If the valve spring height does not match the specifications, replace the valve spring.
  9. Inspect the valve spring seating surface of the valve rotators for wear or gouges. Replace as required.

Cleaning Procedure

    Warning: Refer to Safety Glasses Warning in the Preface section.


    Object Number: 1289663 Size: SH
  1. Clean the cylinder head.
  2. Clean the valve guides.
  3. Clean all of the threaded holes.
  4. Clean the valves of carbon, oil, and varnish.