Removal Procedure
Warning: Refer to Battery Disconnect Warning in the Preface section.
- Disconnect the negative battery cable.
- Remove the rear compartment lock cover.
- Disconnect the electrical connector.
- Remove the screws and the rear compartment lock.
- Disconnect the lock rod.
Installation Procedure
- Connect the lock rod.
Caution: Refer to Fastener Caution in the Preface section.
- Install the rear compartment lock with the screws and tighten to
6 N·m (53 lb in).
- Connect the electrical connector.
- Install the rear compartment lock cover.
- Connect the negative battery cable.