Removal Procedure
Warning: Refer to Battery Disconnect Warning in the Preface section.
- Disconnect the negative battery cable.
- Remove the rod clamp. Refer to
Shift Linkage Adjustment.
- Remove the console.
- Remove the gearshift lever housing bolts and the gearshift lever housing.
Installation Procedure
Caution: Refer to Fastener Caution in the Preface section.
- Install the gearshift lever housing using the gearshift lever housing bolts and tighten to
7 N·m (62 lb in).
- Adjust the shift linkage.
- Install the console.
- Connect the negative battery cable.