Removal Procedure
- Remove the screws and the sun visor from the headliner.
- Disconnect the vanity mirror electrical connector.
- Remove the screw and the sun visor support from the headliner.
Installation Procedure
Caution: Refer to Fastener Caution in the Preface section.
- Install the sun visor support to the headliner with the screw and tighten to
1.5 N·m (13 lb in).
- Connect the vanity mirror electrical connector.
- Install the sun visor to the headliner with the screws and tighten to
4 N·m (35 lb in).