Charging System

• Brush Length - Standard

10.5 mm

0.413 in

• Brush Length - Minimum

1.5 mm

0.059 in

• Direction of Rotation

Clockwise (as viewed from pulley side)

• Maximum Generator Output

80 Amps

• Maximum Generator Speed

18,00 RPM

• No-Load Generator Speed

1100 RPM

• Normal Operating Voltage

12 Volts

• Polarity

Negative Ground

• Regulator Voltage

13.5-15.1 volts

• Rotor Slip Ring Diameter - Standard

14.2-14.4 mm

0.559-0.567 in

• Rotor Slip Ring Diameter - Minimum

12.8 mm

0.504 in

• Standard Rotor Resistance at 20°C (68°F)

2.7-3.1ohms

• Temperature Range

30-90°C

-22-194°F

Drive Belt Tension

• Drive Belt Deflection - New

5-7 mm at 10 kg

0.20-0.27 in at 22 lbs

• Drive Belt Deflection - Used

6-8 mm at 10 kg

0.24-0.31 in at 22 lbs

Starting System

• Brush Length - Standard

15.5 mm

0.610 in

• Brush Length - Minimum

10.0 mm

0.394 in

• Brush Spring Tension - Standard

1.8-2.4 kg

4.0-5.3 lbs

• Brush Spring Tension - Minimum

1.2 kg

2.6 lbs

• Commutator Insulation Depth - Standard

0.60 mm

0.024 in

• Commutator Insulation Depth - Minimum

0.20 mm

0.008 in

• Commutator Outside Diameter - Standard

30 mm

1.18 in

• Commutator Outside Diameter - Minimum

29 mm

1.14 in

• Commutator Runout - Standard

0.05 mm

0.002 in

• Direction of Rotation

Clockwise (as viewed from pinion)

• Number of Pinion Teeth

9

• Output

1.4 kwatts

• Rating

30 seconds

• Starter Current Draw, no load

90 Amps at 11.5 Volts

• Starter Current Draw, load, manual transaxle (9.1 N·m/80.5 lb in of torque)

300 Amps at 7.7 Volts

• Starter Current Draw, load, automatic transaxle (10.4 N·m/92 lb in of torque)

300 Amps at 7.7 Volts

• Locked Rotor - Manual Transaxle (18.6 N·m/13.8 lb ft)

780 Amps at 4 Volts

• Locked Rotor - Automatic Transaxle (25.5 N·m/18.8 lb ft)

980 Amps at 4 Volts

• Starter Solenoid Operating Voltage

8 Volts minimum

• Solenoid Contact Plate Wear - Maximum

0.9 mm

0.035 in

• Voltage

12 Volts