Blower Motor Resistor Replacement for Chevrolet Prizm 1998

1. Remove the instrument panel (IP) compartment. Refer to Instrument Panel Compartment Replacement in Instrument Panel, Gauges and Console.



2. Disconnect the blower motor resistor electrical connector.
3. Remove the two screws and blower motor resistor (4) from the blower case.

1. Install the blower motor resistor (4) to the blower case. Secure with the two screws.
2. Connect the blower motor resistor electrical connector.
3. Install the IP compartment. Refer to Instrument Panel Compartment Replacement in Instrument Panel, Gauges and Console.