- Remove the instrument panel (IP) compartment. Refer to
Instrument Panel Compartment Replacement
in Instrument Panel,
Gauges and Console.
- Remove the fresh/recirc
control cable from the clip at the HVAC module assembly.
- Set the fresh/recirc lever to RECIRC.
- Hold the door lever fully forward (counter clockwise).
- Install the cable to the clip.
- Test the cable for smooth operation.
- Test that the door opens fully in both directions.
- Install the IP compartment. Refer to
Instrument Panel Compartment Replacement
in Instrument Panel, Gauges and Console.