Removal Procedure
- Remove the HVAC module
assembly. Refer to HVAC Module Assembly Replacement.
- Remove the heater core (1). Refer to
Heater Core Replacement
.
- Remove the blower motor cover (2).
- Remove the eleven screws and separate the HVAC module assembly
case halves.
- Remove the evaporator core (4).
Installation Procedure
Important: If the evaporator was replaced add 60 ml (2.0 fl oz)
of compressor oil.
- Install the evaporator core (4) to the HVAC module assembly.
- Install the top half of the HVAC module assembly (3) and
secure with the eleven screws.
- Install the heater core (1). Refer to
Heater Core Replacement
.
- Install the blower motor cover (2).
- Install the HVAC module assembly. Refer to HVAC Module Assembly
Replacement.