Removal Procedure
- Remove the center console trim bezel. Refer to
Instrument Panel Center Trim Panel Replacement
in Instrument
Panel, Gauges and Console.
- Remove the two screws (5) and pull the HVAC control unit (4) forward.
- Disconnect the blower speed selector switch electrical connector (2).
- Disconnect the A/C switch electrical connector (3).
- Remove the following from the HVAC control unit:
• | The temperature control cable (1) |
• | The mode control cable (4) |
• | The fresh/recirc control cable (6) |
- Remove the HVAC control unit.
Installation Procedure
- Install the HVAC control unit.
- Install the following to the HVAC control unit:
• | The temperature control cable (1) |
• | The mode control cable (4) |
• | The fresh/recirc control cable (6) |
- Connect the blower speed selector switch electrical connector (2).
- Connect the A/C switch electrical connector (3).
- Install the HVAC control unit (4) to the instrument panel. Secure with
the two screws (5).
- Install the center console trim bezel. Refer to
Instrument Panel Center Trim Panel Replacement
in Instrument
Panel, Gauges and Console.
- Adjust the cables as necessary, refer to the following:
• | Temperature Control Cable Adjustment . |