Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Were you sent here from the Exterior Lights System Check? | -- | ||
2 |
Does the test lamp illuminate? | -- | ||
3 | Use a J 35616-200 to backprobe junction block 1, C6 cavity 9 to ground. Does the test lamp illuminate? | -- | ||
4 | Connect a J 36169-A between cavity 3 of the TAIL relay and ground. Do the park and tail lamps illuminate? | -- | ||
5 | Repair the open in the GRN wire between the junction block 1, C6 cavity 9 and the junction block 2, C3 cavity 9. Refer to Wiring Repairs in Wiring Systems. Is the repair complete? | -- | -- | |
6 | Replace junction block 1. Is the replacement complete? | -- | -- | |
7 |
Replace the TAIL Relay. Is the replacement complete? | -- | -- | |
8 | Test for continuity between cavity 6 of connector C3 of junction block 2 and cavity 16 of the DRL control module connector using a J 39200 . Is there continuity in the LT GRN wire? | -- | ||
9 | Test for continuity between cavity 14 of the turn/signal/headlamp switch connector and cavity 17 of the DRL control module connector using a J 39200 . Is there continuity in the LT GRN/BLK wire? | -- | ||
10 | Repair the open in the LT GRN wire between cavity 6 of connector C3 of junction block 2 and cavity 16 of the DRL control module connector . Refer to Wiring Repairs in Wiring Systems. Is the replacement complete? | -- | -- | |
11 | Repair the open in the LT GRN/BLK wire between cavity 17 of the DRL control module connector and cavity 14 of the turn signal/headlamp switch. Refer to Wiring Repairs in Wiring Systems. Is the replacement complete? | -- | -- | |
12 | Replace the DRL module. Refer to Daytime Running Lights (DRL) Control Module Replacement . Is the replacement complete? | -- | -- |
